1. Towards a practical structural health monitoring technology for patched cracks in aircraft structure
Baker, A. (Air Vehicles Div., Defence Sci. & Technol. Organ., Melbourne, VIC, Australia); Rajic, N.; Davis, C. Source: Composites Part A: Applied Science and Manufacturing, v 40, n 9, p 1340-52, Sept. 2009
2. Polymer optical fiber sensors for distributed strain measurement and application in structural health monitoring
Liehr, S. (BAM Fed. Inst. for Mater. Res. & Testing, Berlin, Germany); Lenke, P.; Wendt, M.; Krebber, K.; Seeger, M.; Thiele, E.; Metschies, H.; Gebreselassie, B.; Munich, J.C. Source: IEEE Sensors Journal, v 9, n 11, p 1330-8, Nov. 2009
3. Applicability of acoustic noise correlation for structural health monitoring in nondiffuse field conditions
Moulin, E. (Dept. of OAE, Univ. de Valenciennes et du Hainaut Cambresis, Valenciennes, France); Abou Leyla, N.; Assaad, J.; Grondel, S. Source: Applied Physics Letters, v 95, n 9, p 094104 (3 pp.), 31 Aug. 2009
4. Advanced active health monitoring system of liquid rocket engines
Qing, X.P. (Acellent Technol., Inc., Sunnyvale, CA, USA); Zhanjun Wu; Beard, S.; Fu-Kuo Chang Source: Proceedings of the SPIE - The International Society for Optical Engineering, v 7375, p 737506 (8 pp.), 2008
5. An experimental low-cost, low-data-rate rapid structural assessment network
Jren-Chit Chin (Purdue Univ., West Lafayette, IN, USA); Rautenberg, J.M.; Ma, C.Y.T.; Pujol, S.; Yau, D.K.Y. Source: IEEE Sensors Journal, v 9, n 11, p 1361-9, Nov. 2009
6. A trusted affective model approach to proactive health monitoring system
Chao, Xu (School of Computer Science and Technology, Tianjin University, Tianjin, China); Zhiyong, Feng Source: Proceedings - 2008 International Seminar on Future BioMedical Information Engineering, FBIE 2008, p 429-432, 2008, Proceedings - 2008 International Seminar on Future BioMedical Information Engineering, FBIE 2008
7. Use of wireless sensors for timber trestle railroad bridges health monitoring assessment
Moreu, Fernando (ESCA Consultants, Inc., 2008 Linview Ave., Urbana, IL); Nagayama, Tomonori Source: Proceedings of the 2008 Structures Congress - Structures Congress 2008: Crossing the Borders, v 314, 2008, Proceedings of the 2008 Structures Congress - Structures Congress 2008: Crossing the Borders
8. Necessity of the bridge health monitoring system to mitigate natural and man-made disasters
Sung-Pil Chang (Seoul Nat. Univ., Seoul, South Korea); Jaeyeol Yee; Jungwhee Lee Source: Structure and Infrastructure Engineering, v 5, n 3, p 173-97, June 2009
9. Damage detection on the joint of steel frame through high-frequency admittance signals
Dansheng Wang (Sch. of Civil Eng. & Mech., Huazhong Univ. of Sci. & Technol., Wuhan, China); Hongping Zhu; Huaqiang Zhou; Haiping Yang Source: Proceedings of the SPIE - The International Society for Optical Engineering, v 7375, p 73753J (6 pp.), 2008
10. EADS generic approach for operational aircraft health monitoring
Ariel, Jacques (EADS) Source: IET Seminar Digest, v 2008, n 12390, 2008, IET Seminar on Aircraft Health Management for New Operational and Enterprise Solutions
11. Fiber in the home: Broadband networks and optic distributed sensing
Liu, Baozhong (College of Computer Science and Engineering, Wuhan Institute of Technology, 693 ChuXiong Road, Wuhan, 430073, China); Peng, Meng; Wang, Wei; Liu, Boya Source: Proceedings - 2008 International Seminar on Future BioMedical Information Engineering, FBIE 2008, p 223-228, 2008, Proceedings - 2008 International Seminar on Future BioMedical Information Engineering, FBIE 2008
12. Plate-like structure health monitoring based on ultrasonic guided wave technology by using bonded piezoelectric ceramic wafers
Liu Zenghua (Coll. of Mech. Eng. & Appl. Electron. Technol., Beijing Univ. of Technol., Beijing, China); Zhao Jichen; He Cunfu; Wu Bin Source: Proceedings of the SPIE - The International Society for Optical Engineering, v 7375, p 73755S (6 pp.), 2008
13. Comparison of modal parameter identification algorithms based on shaking table model test data
Jianping Han (Res. Inst. of Struct. Eng. & Disaster Reduction, Tongji Univ., Shanghai, China); Xilin Lu; Feixing Wang Source: Proceedings of the SPIE - The International Society for Optical Engineering, v 7375, p 73750K (7 pp.), 2008
14. Baseline-free imaging method based on new pzt sensor arrangements
Qiang, Wang (Aeronautical Science Key Laboratory for Smart Materials and Structures, Nanjing University of Aeronautics and Astronautics, 29 Yu Dao Street, Nanjing 210016, China); Shenfang, Yuan Source: Journal of Intelligent Material Systems and Structures, v 20, n 14, p 1663-1673, 2009
15. Policy and management of medical devices for the public health care sector in Benin
Houngbo, P.Th. (Minist. of Health, Benin); Wilt, G.J.V.D.; Medenou, D.; Dakpanon, L.Y.; Bunders, J.; Ruitenberg, J. Source: IET Seminar Digest, v 2008, n 12213, 2008, 5th IET International Seminar on Appropriate Healthcare Technologies for Developing Countries (AHT 2008)
16. Influence of interface degradation on the performance of piezoelectric actuators
Lanzara, Giulia (Department of Aeronautics and Astronautics, Stanford University, Stanford, CA 94305-4035, United States); Yoon, Youngki; Kim, Yujun; Chang, Fu-Kuo Source: Journal of Intelligent Material Systems and Structures, v 20, n 14, p 1699-1710, 2009
17. Remote sensing for bridge health monitoring
Wanqiu Liu (UNCC, Depart. of Civil & Environ. Eng., Charlotte, NC, USA); She-Een Chen; Hauser, E. Source: Proceedings of the SPIE - The International Society for Optical Engineering, v 7456, p 74560D (10 pp.), 2009
18. Sequential damage detection approaches for beams using time-modal features and artificial neural networks
Jae-Hyung Park (Dept. of Ocean Eng., Pukyong Nat. Univ., Busan, South Korea); Jeong-Tae Kim; Dong-Soo Hong; Duc-Duy Ho; Jin-Hak Yi Source: Journal of Sound and Vibration, v 323, n 1-2, p 451-74, 5 June 2009
19. Piezoelectric active-sensor diagnostics and validation using instantaneous baseline data
Overly, T.G. (Los Alamos Nat. Lab., Los Alamos, NM, USA); Gyuhae Park; Farinholt, K.M.; Farrar, C.R. Source: IEEE Sensors Journal, v 9, n 11, p 1414-21, Nov. 2009
20. Passively controlled MR damper in the benchmark structural control problem for seismically excited highway bridge
Pradono, Mulyo Harris (Center for Structural Strength Technology, Agency for the Assessment and Application of Technology, Puspiptek, Tangerang 15314, Indonesia); Iemura, Hirokazu; Igarashi, Akira; Toyooka, Akihiro; Kalantari, Afshin Source: Structural Control and Health Monitoring, v 16, n 6, p 626-638, October 2009, Special Issue: Part 2: Benchmark Structural Control Problem for Seismically Excited Highway Bridge
21. Research of cable tension sensor with difference structure based on magnetoelastic effect
Dedong Tang (Coll. of Electron. Inf. Eng., Chongqing Univ. of Sci. & Technol., Chongqing, China); Shangzun Yuan; Xinping Yan; Pengfei Li Source: 2009 8th IEEE International Conference on Cognitive Informatics (ICCI), p 264-9, 2009
22. Inverse problem in damage detection
Ying Luo (Fac. of Sci., Jiangsu Univ., Zhenjiang, China); Zhongfang Li Source: Proceedings of the SPIE - The International Society for Optical Engineering, v 7375, p 73752Q (6 pp.), 2008
23. Service contracting for helicopter HUMS
Dollin, Andy Source: IET Seminar Digest, v 2008, n 12390, 2008, IET Seminar on Aircraft Health Management for New Operational and Enterprise Solutions
24. Robust direct adaptive controller for the nonlinear highway
Benchmark, Bridge (Department of Civil and Environmental Engineering, University of Waterloo, 200 University Avenue W., Waterloo, ON N2L 3G1, Canada); Narasimhan, Sriram Source: Structural Control and Health Monitoring, v 16, n 6, p 599-612, October 2009, Special Issue: Part 2: Benchmark Structural Control Problem for Seismically Excited Highway Bridge
25. Design of smart refrigerator for ubiquitous healthcare
Bo-Rim Ryu (Seoul Women's Univ., Seoul, South Korea); Tae Soo Lee; Heung-Gyoon Ryu Source: IET Conference on Assisting Living 2009, p 4 pp., 2009
Sunday, October 18, 2009
Sunday, October 11, 2009
Review
1. Application of smart 3-D laser scanner in structural health monitoring
Sumitro, S. (Smart Structures LLC, IL, United States); Matsuda, H.; Itoh, Y.; Nishimura, S. Source: Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, p 566-567, 2008, Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST 07
2. Structural health monitoring of a concrete column subjected shake table excitations using smart aggregates
Liao, W.I. (National Taipei University of Technology, Taipei, Taiwan); Gu, H.; Olmi, C.; Song, G.; Mo, Y.L.; Loh, C.H. Source: Earth and Space Conference 2008: Proceedings of the 11th Aerospace Division International Conference on Engineering, Science, Construction, and Operations in Challenging Environments, v 323, 2008, Earth and Space Conference 2008: Proceedings of the 11th Aerospace Division International Conference on Engineering, Science, Construction, and Operations in Challenging Environments
3. Structural health monitoring of bridges in the State of Connecticut
Liu, C. (WSP-SELLS Inc., Briarcliff Manor, NY, USA); Olund, J.; Cardini, A.; D'Attilio, P.; Feldblum, E.; DeWolf, J. Source: Earthquake Engineering and Engineering Vibration, v 7, n 4, p 427-37, Dec. 2008
4. Structural health monitoring with smart NDE technology
Lee, Seung-Seok (Safety Metrology Group, Korea Research Institute of Standards and Science, Korea, Republic of); Kwon, Il-Bum; Yoon, Dong-Jin Source: Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, p 17-20, 2008, Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST 07
5. Optimal experimental design for structural health monitoring applications
Lam, H.F. (City University of Hong Kong, Department of Building and Construction, Hong Kong, Hong Kong); Papadimitriou, C.; Ntotsios, E. Source: Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, p 238, 2008, Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST 07
6. A new impedance measurement system for PZT-based structural health monitoring
Baptista, Fabricio Guimarães (Department of Electrical Engineering, São Paulo State University (UNESP), São Paulo 15385-000, Brazil); Filho, Jozue Vieira Source: IEEE Transactions on Instrumentation and Measurement, v 58, n 10, p 3602-3608, 2009
7. A circuit design for piezoelectric impedance-based health monitoring
Zhao, Zhou (North Dakota State University, Fargo, ND 58105-5285, United States); Wang, Shirui; You, Chao Source: Earth and Space Conference 2008: Proceedings of the 11th Aerospace Division International Conference on Engineering, Science, Construction, and Operations in Challenging Environments, v 323, 2008, Earth and Space Conference 2008: Proceedings of the 11th Aerospace Division International Conference on Engineering, Science, Construction, and Operations in Challenging Environments
8. Structural health monitoring with fiber optic sensors
Ansari, F. (Dept. of Civil & Mater. Eng., Smart Sensors, Univ. of Illinois at Chicago, Chicago, IL, USA) Source: Frontiers of Mechanical Engineering in China, v 4, n 2, p 103-10, June 2009
9. On optimal sensor placement for structural health monitoring by subspace approximation
Li, D.S. (Dept. of Civil Engineering, Dalian University of Technology, 116023, China); Wang, G.X.; Li, H.N.; Ren, L.; Song, G.B. Source: Earth and Space Conference 2008: Proceedings of the 11th Aerospace Division International Conference on Engineering, Science, Construction, and Operations in Challenging Environments, v 323, 2008, Earth and Space Conference 2008: Proceedings of the 11th Aerospace Division International Conference on Engineering, Science, Construction, and Operations in Challenging Environments
10. Structural integrity monitoring index for ship and offshore structures
De Leeuw, B. (Plant Asset Management, Houston, TX, United States); Brennan, F.P. Source: Proceedings of MARSTRUCT 2009, 2nd International Conference on Marine Structures-Analysis and Design of Marine Structures, p 261-265, 2009, Proceedings of MARSTRUCT 2009, 2nd International Conference on Marine Structures - Analysis and Design of Marine Structures
11. Adaptive quadratic sum squares error with unknown inputs for damage identification of structures
Yang, Jann N. (Department of Civil and Environmental Engineering, University of California, Irvine, CA, United States); Huang, Hongwei Source: Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, p 243, 2008, Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST 07
12. Intelligent structures and systems: Dream, reality, and future
Huang, Shang-Lian (Key Laboratory for Optoelectronic Technology and System, Education Ministry of China, Chongqing University, Chongqing, China) Source: Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, p 3-15, 2008, Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST 07
13. Structural monitoring and design verification of Akashi Kaikyo bridge
Katsuchi, H. (Yokohama National University, Yokohama, 240-8501, Japan); Yamada, H.; Kusuhara, S. Source: Earth and Space Conference 2008: Proceedings of the 11th Aerospace Division International Conference on Engineering, Science, Construction, and Operations in Challenging Environments, v 323, 2008, Earth and Space Conference 2008: Proceedings of the 11th Aerospace Division International Conference on Engineering, Science, Construction, and Operations in Challenging Environments
14. Suitability of nondestructive testing methods for structural health monitoring of civil infrastructures
Alampalli, Sreenivas (Bridge Evaluation Services Bureau, New York Department of Transportation, 50 Wolf Road, Albany, NY 12232); Ettouney, Mohammed Source: Proceedings of the 2008 Structures Congress - Structures Congress 2008: Crossing the Borders, v 314, 2008, Proceedings of the 2008 Structures Congress - Structures Congress 2008: Crossing the Borders
15. Research of smart materials and structures at NUAA
Qiu, Jinhao (Aeronautical Key Laboratory for Smart Materials and Structures, College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China) Source: Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, p 63-72, 2008, Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST 07
16. Utilization of strong motion accelerometers for real time monitoring of structural properties
Halling, Marvin W. (Utah State University, Logan, UT); Hansen, Zachary C.; Barr, Paul J.; Marchant, David Source: Proceedings of the 2008 Structures Congress - Structures Congress 2008: Crossing the Borders, v 314, 2008, Proceedings of the 2008 Structures Congress - Structures Congress 2008: Crossing the Borders
17. Distributed model updating in smart wireless monitoring systems
Zimmerman, Andrew (University of Michigan, Ann Arbor, MI); Lynch, Jerome P. Source: Proceedings of the 2008 Structures Congress - Structures Congress 2008: Crossing the Borders, v 314, 2008, Proceedings of the 2008 Structures Congress - Structures Congress 2008: Crossing the Borders
18. Long-term health monitoring of post-tensioning box girder bridges
Wang, Ming L. (University of Illinois-Chicago, Chicago, IL, United States) Source: Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, p 41-48, 2008, Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST 07
19. Remote health monitoring adoption model based on artificial neural networks
Huang, Jui-Chen (Department of Health Business Administration, Hungkuang University, Taiwan) Source: Expert Systems with Applications, v 37, n 1, p 307-314, January 2010
20. Health monitoring systems for massive emergency situations
Smalls, Jordan; Wang, Yue; Li, Xi; Chen, Zehuang; Tang, K. Wendy Source: 2009 IEEE Long Island Systems, Applications and Technology Conference, LISAT 2009, 2009, 2009 IEEE Long Island Systems, Applications and Technology Conference, LISAT 2009
21. Bridge health monitoring system based on vibration measurements
Ntotsios, E. (Dept. of Mech. & Ind. Eng., Univ. of Thessaly, Volos, Greece); Papadimitriou, C.; Panetsos, P.; Karaiskos, G.; Perros, K.; Perdikaris, P. Source: Bulletin of Earthquake Engineering, v 7, n 2, p 469-83, May 2009
22. Long-term thermal performance of a CFRP-reinforced bridge deck
Bell, Erin Santini (University of New Hampshire, Kingsbury Hall, Durham, NH 03824); Sipple, Jesse; Yost, Joseph Source: Proceedings of the 2008 Structures Congress - Structures Congress 2008: Crossing the Borders, v 314, 2008, Proceedings of the 2008 Structures Congress - Structures Congress 2008: Crossing the Borders
23. Experiment on dynamic response of fiber optic Fabry-Perot sensors and its application in structural health monitoring
Zhang, Wentao (Key Lab. of Structure Health Monitoring and Control of Hebei Province, Shijiazhuang Railway Institute, Shijiazhuang, Hebei, China); Dai, Jingyun; Sun, Baochen; Du, Yanliang Source: Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, p 504, 2008, Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST 07
24. Damage monitoring and life predication from nondestructive evaluation to structural health monitoring
Tian, Gui Yun (School of Electrical, Electronic and Computer Engineering, Newcastle University, United Kingdom); Wilson, John; Zhang, Binqiang; Haitao Wang Source: Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, p 159, 2008, Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST 07
25. Artificial immune pattern recognition for structure damage classification
Chen, Bo (Department of Mechanical Engineering - Engineering Mechanics, Michigan Technological University, 815 R.L. Smith Building, 1400 Townsend Dr., Houghton, MI 49931, United States); Zang, Chuanzhi Source: Computers and Structures, v 87, n 21-22, p 1394-1407, November 2009
Sumitro, S. (Smart Structures LLC, IL, United States); Matsuda, H.; Itoh, Y.; Nishimura, S. Source: Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, p 566-567, 2008, Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST 07
2. Structural health monitoring of a concrete column subjected shake table excitations using smart aggregates
Liao, W.I. (National Taipei University of Technology, Taipei, Taiwan); Gu, H.; Olmi, C.; Song, G.; Mo, Y.L.; Loh, C.H. Source: Earth and Space Conference 2008: Proceedings of the 11th Aerospace Division International Conference on Engineering, Science, Construction, and Operations in Challenging Environments, v 323, 2008, Earth and Space Conference 2008: Proceedings of the 11th Aerospace Division International Conference on Engineering, Science, Construction, and Operations in Challenging Environments
3. Structural health monitoring of bridges in the State of Connecticut
Liu, C. (WSP-SELLS Inc., Briarcliff Manor, NY, USA); Olund, J.; Cardini, A.; D'Attilio, P.; Feldblum, E.; DeWolf, J. Source: Earthquake Engineering and Engineering Vibration, v 7, n 4, p 427-37, Dec. 2008
4. Structural health monitoring with smart NDE technology
Lee, Seung-Seok (Safety Metrology Group, Korea Research Institute of Standards and Science, Korea, Republic of); Kwon, Il-Bum; Yoon, Dong-Jin Source: Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, p 17-20, 2008, Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST 07
5. Optimal experimental design for structural health monitoring applications
Lam, H.F. (City University of Hong Kong, Department of Building and Construction, Hong Kong, Hong Kong); Papadimitriou, C.; Ntotsios, E. Source: Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, p 238, 2008, Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST 07
6. A new impedance measurement system for PZT-based structural health monitoring
Baptista, Fabricio Guimarães (Department of Electrical Engineering, São Paulo State University (UNESP), São Paulo 15385-000, Brazil); Filho, Jozue Vieira Source: IEEE Transactions on Instrumentation and Measurement, v 58, n 10, p 3602-3608, 2009
7. A circuit design for piezoelectric impedance-based health monitoring
Zhao, Zhou (North Dakota State University, Fargo, ND 58105-5285, United States); Wang, Shirui; You, Chao Source: Earth and Space Conference 2008: Proceedings of the 11th Aerospace Division International Conference on Engineering, Science, Construction, and Operations in Challenging Environments, v 323, 2008, Earth and Space Conference 2008: Proceedings of the 11th Aerospace Division International Conference on Engineering, Science, Construction, and Operations in Challenging Environments
8. Structural health monitoring with fiber optic sensors
Ansari, F. (Dept. of Civil & Mater. Eng., Smart Sensors, Univ. of Illinois at Chicago, Chicago, IL, USA) Source: Frontiers of Mechanical Engineering in China, v 4, n 2, p 103-10, June 2009
9. On optimal sensor placement for structural health monitoring by subspace approximation
Li, D.S. (Dept. of Civil Engineering, Dalian University of Technology, 116023, China); Wang, G.X.; Li, H.N.; Ren, L.; Song, G.B. Source: Earth and Space Conference 2008: Proceedings of the 11th Aerospace Division International Conference on Engineering, Science, Construction, and Operations in Challenging Environments, v 323, 2008, Earth and Space Conference 2008: Proceedings of the 11th Aerospace Division International Conference on Engineering, Science, Construction, and Operations in Challenging Environments
10. Structural integrity monitoring index for ship and offshore structures
De Leeuw, B. (Plant Asset Management, Houston, TX, United States); Brennan, F.P. Source: Proceedings of MARSTRUCT 2009, 2nd International Conference on Marine Structures-Analysis and Design of Marine Structures, p 261-265, 2009, Proceedings of MARSTRUCT 2009, 2nd International Conference on Marine Structures - Analysis and Design of Marine Structures
11. Adaptive quadratic sum squares error with unknown inputs for damage identification of structures
Yang, Jann N. (Department of Civil and Environmental Engineering, University of California, Irvine, CA, United States); Huang, Hongwei Source: Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, p 243, 2008, Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST 07
12. Intelligent structures and systems: Dream, reality, and future
Huang, Shang-Lian (Key Laboratory for Optoelectronic Technology and System, Education Ministry of China, Chongqing University, Chongqing, China) Source: Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, p 3-15, 2008, Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST 07
13. Structural monitoring and design verification of Akashi Kaikyo bridge
Katsuchi, H. (Yokohama National University, Yokohama, 240-8501, Japan); Yamada, H.; Kusuhara, S. Source: Earth and Space Conference 2008: Proceedings of the 11th Aerospace Division International Conference on Engineering, Science, Construction, and Operations in Challenging Environments, v 323, 2008, Earth and Space Conference 2008: Proceedings of the 11th Aerospace Division International Conference on Engineering, Science, Construction, and Operations in Challenging Environments
14. Suitability of nondestructive testing methods for structural health monitoring of civil infrastructures
Alampalli, Sreenivas (Bridge Evaluation Services Bureau, New York Department of Transportation, 50 Wolf Road, Albany, NY 12232); Ettouney, Mohammed Source: Proceedings of the 2008 Structures Congress - Structures Congress 2008: Crossing the Borders, v 314, 2008, Proceedings of the 2008 Structures Congress - Structures Congress 2008: Crossing the Borders
15. Research of smart materials and structures at NUAA
Qiu, Jinhao (Aeronautical Key Laboratory for Smart Materials and Structures, College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China) Source: Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, p 63-72, 2008, Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST 07
16. Utilization of strong motion accelerometers for real time monitoring of structural properties
Halling, Marvin W. (Utah State University, Logan, UT); Hansen, Zachary C.; Barr, Paul J.; Marchant, David Source: Proceedings of the 2008 Structures Congress - Structures Congress 2008: Crossing the Borders, v 314, 2008, Proceedings of the 2008 Structures Congress - Structures Congress 2008: Crossing the Borders
17. Distributed model updating in smart wireless monitoring systems
Zimmerman, Andrew (University of Michigan, Ann Arbor, MI); Lynch, Jerome P. Source: Proceedings of the 2008 Structures Congress - Structures Congress 2008: Crossing the Borders, v 314, 2008, Proceedings of the 2008 Structures Congress - Structures Congress 2008: Crossing the Borders
18. Long-term health monitoring of post-tensioning box girder bridges
Wang, Ming L. (University of Illinois-Chicago, Chicago, IL, United States) Source: Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, p 41-48, 2008, Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST 07
19. Remote health monitoring adoption model based on artificial neural networks
Huang, Jui-Chen (Department of Health Business Administration, Hungkuang University, Taiwan) Source: Expert Systems with Applications, v 37, n 1, p 307-314, January 2010
20. Health monitoring systems for massive emergency situations
Smalls, Jordan; Wang, Yue; Li, Xi; Chen, Zehuang; Tang, K. Wendy Source: 2009 IEEE Long Island Systems, Applications and Technology Conference, LISAT 2009, 2009, 2009 IEEE Long Island Systems, Applications and Technology Conference, LISAT 2009
21. Bridge health monitoring system based on vibration measurements
Ntotsios, E. (Dept. of Mech. & Ind. Eng., Univ. of Thessaly, Volos, Greece); Papadimitriou, C.; Panetsos, P.; Karaiskos, G.; Perros, K.; Perdikaris, P. Source: Bulletin of Earthquake Engineering, v 7, n 2, p 469-83, May 2009
22. Long-term thermal performance of a CFRP-reinforced bridge deck
Bell, Erin Santini (University of New Hampshire, Kingsbury Hall, Durham, NH 03824); Sipple, Jesse; Yost, Joseph Source: Proceedings of the 2008 Structures Congress - Structures Congress 2008: Crossing the Borders, v 314, 2008, Proceedings of the 2008 Structures Congress - Structures Congress 2008: Crossing the Borders
23. Experiment on dynamic response of fiber optic Fabry-Perot sensors and its application in structural health monitoring
Zhang, Wentao (Key Lab. of Structure Health Monitoring and Control of Hebei Province, Shijiazhuang Railway Institute, Shijiazhuang, Hebei, China); Dai, Jingyun; Sun, Baochen; Du, Yanliang Source: Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, p 504, 2008, Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST 07
24. Damage monitoring and life predication from nondestructive evaluation to structural health monitoring
Tian, Gui Yun (School of Electrical, Electronic and Computer Engineering, Newcastle University, United Kingdom); Wilson, John; Zhang, Binqiang; Haitao Wang Source: Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST'07, p 159, 2008, Proceedings of the World Forum on Smart Materials and Smart Structures Technology, SMSST 07
25. Artificial immune pattern recognition for structure damage classification
Chen, Bo (Department of Mechanical Engineering - Engineering Mechanics, Michigan Technological University, 815 R.L. Smith Building, 1400 Townsend Dr., Houghton, MI 49931, United States); Zang, Chuanzhi Source: Computers and Structures, v 87, n 21-22, p 1394-1407, November 2009
Wednesday, September 30, 2009
1. Wireless-zigbee strain gage sensor system for structural health monitoring
Ide, Hiroshi (Alpha STAR Electronic, Long beach, CA, United States); Abdi, Frank; Dang, Chau; Takahashi, Tatsuya; Sauer, Bruce; Miraj, Rashid Source: Proceedings of SPIE - The International Society for Optical Engineering, v 7314, 2009, Photonics in the Transportation Industry: Auto to Aerospace II
2. Structural health monitoring robot using paired structured light
Hyun Myung (Dept. of Civil & Environ. Eng., KAIST, Daejeon, South Korea); Seungmok Lee; Bum-Joo Lee Source: 2009 IEEE International Symposium on Industrial Electronics (ISIE 2009), p 396-401, 2009
3. Scaled acoustics experiments and vibration prediction based structural health monitoring
Sarigul-Klijn, Nesrin (Department of Mechanical and Aeronautical Engineering, University of California at Davis, Davis, CA, United States); Lopez, Israel; Baek, Seung-Il Source: ASME International Mechanical Engineering Congress and Exposition, Proceedings, v 11, p 363-371, 2009, 2008 Proceedings of the ASME International Mechanical Engineering Congress and Exposition, IMECE 2008
4. Fibre-optic structural health monitoring in the energy industry
Ecke, W. (IPHT - Inst. of Photonic Technol., Jena, Germany); Willsch, R.; Bartelt, H. Source: 2009 14th OptoElectronics and Communications Conference (OECC), p 2 pp., 2009
5. Test-bed for the remote health monitoring system for bridge structures using FBG sensors
Lee, Chin-Hyung (Structural Engineering and Bridges Research Division, Infrastructure Research Department, Korea Institute of Construction Technology, 2311, Daewha-dong, Ilsanseo-gu, Goyang-si, Gyeonggi-do 411-712, Korea, Republic of); Park, Ki-Tae; Joo, Bong-Chul; Hwang, Yoon-Koog Source: Proceedings of SPIE - The International Society for Optical Engineering, v 7362, 2009, Smart Sensors, Actuators, and MEMS IV
6. Modal identification and damage detection for structural health monitoring under ambient vibration environment
Yun, Gun Jin (The University of Akron, Department of Civil Engineering, 244 Sumner St., Akron, United States) Source: Proceedings of the 2009 Structures Congress - Don't Mess with Structural Engineers: Expanding Our Role, p 1181-1190, 2009, Proceedings of the 2009 Structures Congress - Don't Mess with Structural Engineers: Expanding Our Role
7. Title: Accounting for the impact of thermal loads in nondestructive bridge testing
Bell, Erin Santini (Department of Civil Engineering, University of New Hampshire, Durham, NH 03824, United States); Sipple, Jesse D. Source: Proceedings of the 2009 Structures Congress - Don't Mess with Structural Engineers: Expanding Our Role, p 406-415, 2009, Proceedings of the 2009 Structures Congress - Don't Mess with Structural Engineers: Expanding Our Role
8. Design and evaluation of optical fibre sensors in civil engineering applications for Structural Health Monitoring
Grattan, K.T.V. (Sch. of Eng. & Math. Sci., City Univ. London, Northampton, UK); Kerrouche, A.; Tong Sun; Grattan, S.K.T.; Taylor, S.E.; Basheer, P.A.M. Source: 2009 14th OptoElectronics and Communications Conference (OECC), p 2 pp., 2009
9. Structural health monitoring of bridges: Fundamentals, application case study and organizational considerations
Catbas, F.Necati (University of Central Florida, Orlando, FL, United States); Gul, Mustafa; Zaurin, Ricardo; Terrell, Thomas; Dere, Yunus; Ansley, Marcus H.; Frangopol, Dan M.; Grimmelsman, Kirk A. Source: Proceedings of the 2009 Structures Congress - Don't Mess with Structural Engineers: Expanding Our Role, p 108-118, 2009, Proceedings of the 2009 Structures Congress - Don't Mess with Structural Engineers: Expanding Our Role
10. Applicability of acoustic noise correlation for structural health monitoring in nondiffuse field conditions
Moulin, Emmanuel (Department of OAE, IEMN, Universit de Valenciennes et du Hainaut Cambrsis, Le Mont Houy, 59313 Valenciennes Cedex 9, France); Abou Leyla, Najib; Assaad, Jamal; Grondel, Sebastien Source: Applied Physics Letters, v 95, n 9, 2009
11. A semantic middleware for autonomic wireless sensor networks
Da Rocha, Atslands R. (Federal University of Ceará, km5 Estrada do Cedro, Quixadá CE, Brazil); Delicato, Flávia C.; De Souza, José Neuman; Gomes, Danielo G.; Pirmez, Luci Source: ACM International Conference Proceeding Series, v 389, p 19-25, 2009, Proceedings of the 2009 Workshop on Middleware for Ubiquitous and Pervasive Systems, WMUPS'09, Co-located with The 4th International Conference on COMmunication System softWAre and middlewaRE - COMSWA
12. Reference-free damage detection using instantaneous baseline measurements
Anton, Steven R. (Virginia Polytechnic Institute and State University, Blacksburg, VA 24061, United States); Inman, Daniel J.; Park, Gyuhae Source: AIAA Journal, v 47, n 8, p 1952-1964, August 2009
13. Structural damage identification based on laser ultrasonic propagation imaging technology
Chiaa, Chen-Ciang (Department of Aerospace Engineering, Chonbuk National University, Duckjin-dong, Jeonju 561-756, Korea, Republic of); Janga, Si-Gwang; Lee, Jung-Ryul; Yoon, Dong-Jin Source: Proceedings of SPIE - The International Society for Optical Engineering, v 7389, 2009, Optical Measurement Systems for Industrial Inspection VI
14. Application of a time-domain local identification methodology to compact analysis of continuous and complete structural response data
Nigbor, Robert L. (Department of Civil and Environmental Engineering, UCLA, Los Angeles, CA 90095, United States); Nayeri, Reza D.; Masri, Sami F.; Ghanem, Roger G. Source: Proceedings of the 2009 Structures Congress - Don't Mess with Structural Engineers: Expanding Our Role, p 1928-1937, 2009, Proceedings of the 2009 Structures Congress - Don't Mess with Structural Engineers: Expanding Our Role
15. Effect of bending dynamics of piezoelectric patch actuator on lamb wave displacement field
Huang, H. (University of Texas at Arlington, Arlington, TX, United States); Pamphile, T. Source: ASME International Mechanical Engineering Congress and Exposition, Proceedings, v 12, p 539-548, 2009, 2008 Proceedings of ASME International Mechanical Engineering Congress and Exposition, IMECE 2008
16. Fiber optic sensor applications in transportation infrastructure protection
Krohn, David (Light Wave Venture LLC); Nicholls, Paul Source: Proceedings of SPIE - The International Society for Optical Engineering, v 7314, 2009, Photonics in the Transportation Industry: Auto to Aerospace II
17. A self-powered wireless health and environment monitoring system
Singh, Ajay (Autonomous Systems Laboratory, Department of Mechanical Engineering, State University of New York at Stony Brook, Stony Brook, NY 11794-2300, United States); Koomson, Vincent; Yu, Jaewook; Nejat, Goldie Source: ASME International Mechanical Engineering Congress and Exposition, Proceedings, v 2, p 511-519, 2009, 2008 Proceedings of ASME International Mechanical Engineering Congress and Exposition, IMECE 2008
18. Damage detection with spatially distributed 2D Continuous Wavelet Transform
Huang, Yi (CCG Veritas, Houston, TX 77072, United States); Meyer, D.; Nemat-Nasser, S. Source: Mechanics of Materials, v 41, n 10, p 1096-1107, October 2009
19. Prognostication and health monitoring of electronics in implantable biological systems
Lall, Pradeep (Auburn University, Department of Mechanical Engineering, NSF Center for Advanced Vehicle Electronics, Auburn, AL 36849, United States); Gupta, Prashant; Kulkarni, Manish; Panchagade, Dhananjay; Suhling, Jeff; Hofmeister, James Source: ASME International Mechanical Engineering Congress and Exposition, Proceedings, v 2, p 657-671, 2009, 2008 Proceedings of ASME International Mechanical Engineering Congress and Exposition, IMECE 2008
20. Experimental deployment and validation of a distributed SHM system using wireless sensor networks
Castaneda, Nestor E. (Department of Mechanical, Aerospace and Structural Engineering, Washington University in St. Louis, St. Louis, MO 63130, United States); Dyke, Shirley; Lu, Chenyang; Sun, Fei; Hackmann, Greg Source: Structural Engineering and Mechanics, v 32, n 6, p 787-809, August 2009
21. Online condition monitoring of axial-flow turbomachinery blades using rotor-axial Eulerian laser Doppler vibrometry
Oberholster, A.J. (Dept. of Mech. & Aeronaut. Eng., Univ. of Pretoria, Pretoria, South Africa); Heyns, P.S. Source: Mechanical Systems and Signal Processing, v 23, n 5, p 1634-43, July 2009
22. New dissipative leapfrog finite difference scheme for elastodynamic simulation in noninertial frames
Kaul, Upender K. (NASA Ames Research Center, Moffett Field, CA 94035, United States) Source: AIAA Journal, v 47, n 8, p 1916-1925, August 2009
23. Realtime damage detection in buildings using filter based radial basis function network mapping
Contreras, Michael (Depts. of Civil and Env. Engr., Rice University, Houston, TX 77005, United States); Nagarajaiah, Satish; Narasimhan, Sriram Source: Proceedings of the 2009 Structures Congress - Don't Mess with Structural Engineers: Expanding Our Role, p 1097-1106, 2009, Proceedings of the 2009 Structures Congress - Don't Mess with Structural Engineers: Expanding Our Role
24. Analytical estimation of power harvested from a rotating helicopter blade
Warner, Grant M. (Howard University, Washington, DC, United States); Ogunlade, Olufemi; Lin, Ray Sing; Chaudhry, Zaffir; Wake, Brian Source: ASME International Mechanical Engineering Congress and Exposition, Proceedings, v 11, p 447-450, 2009, 2008 Proceedings of the ASME International Mechanical Engineering Congress and Exposition, IMECE 2008
25. Estimation of AE parameters for monitoring bearing in a lathe using multiple regression and GMDH
Sathish Kumar, K.M. (Department of Mechanical Engineering, BMS Institute of Technology, Bangalore Karnataka, India); Ravindra, H.V. Source: ASME International Mechanical Engineering Congress and Exposition, Proceedings, v 11, p 81-88, 2009, 2008 Proceedings of the ASME International Mechanical Engineering Congress and Exposition, IMECE 2008
Monday, September 21, 2009
Urgent Opening for VerPro Bishnupur( Sr.Position)
We are pleased to inform you that we have an opening with our prestigious client VerPro in Bishnupur
Kindly let us know your interest in this position and also send us your update RESUME in WORD FORMAT immediately mentioning
1)present CTC
2)expected CTC
3)Notice period.
4)Willing to relocate to Bishnupur, WB, India
Experience:10+
The individual should be expert and take full responsibility for the following
1. Complete knowledge of all major SHM research labs and professors in India and preferably globally
2. Identifying the best partners in the eco-system for particular research needs in SHM
3. Establishing formal relationships – MoU/NDA/IPR sharing/etc. and connecting SHM researchers to appropriate groups
4. Maintaining friendly ties in the eco-system, while the researchers co-work with their corresponding professors
5. Handling sensitive / confidential information carefully
6. Regular status reports to VerPro
7. Excellent written and oral communication skills
Role: Open R&D management
Keyword: Managing University Relations
Qualification:
Ph.D / M.Tech / MS Computational Science/Engineering.
Exp: 10 +yrs
We are pleased to inform you that we have an opening with our prestigious client VerPro in Bishnupur
Kindly let us know your interest in this position and also send us your update RESUME in WORD FORMAT immediately mentioning
1)present CTC
2)expected CTC
3)Notice period.
4)Willing to relocate to Bishnupur, WB, India
Experience:10+
The individual should be expert and take full responsibility for the following
1. Complete knowledge of all major SHM research labs and professors in India and preferably globally
2. Identifying the best partners in the eco-system for particular research needs in SHM
3. Establishing formal relationships – MoU/NDA/IPR sharing/etc. and connecting SHM researchers to appropriate groups
4. Maintaining friendly ties in the eco-system, while the researchers co-work with their corresponding professors
5. Handling sensitive / confidential information carefully
6. Regular status reports to VerPro
7. Excellent written and oral communication skills
Role: Open R&D management
Keyword: Managing University Relations
Qualification:
Ph.D / M.Tech / MS Computational Science/Engineering.
Exp: 10 +yrs
reference
1. “Corrosion-enabled powering approach for structural health monitoring sensor networks” Ouellette, Scott A. (Department of Structural Engineering, University of California San Diego, 9500 Gilman Dr. 0085, San Diego, CA 92093-0085); Mascareñas, David D.L.; Todd, Michael D. Source: Proceedings of SPIE - The International Society for Optical Engineering, v 7288, 2009, Active and Passive Smart Structures and Integrated Systems 2009 Language: English
2. “Validation of HDOP measure for impact detection in sensor network-based structural health monitoring” Akopian, D. (Dept. of Electr. & Comput. Eng., Univ. of Texas at San Antonio, San Antonio, TX, USA); Melkonyan, A.; Chen, C.L.P. Source: IEEE Sensors Journal, v 9, n 9, p 1098-102, Sept. 2009
3. “Design and implementation of the structure health monitoring system for bridge based on wireless sensor network” Yin, An (Department of Control Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China); Wang, Bingwen; Liu, Zhuo; Hu, Xiaoya Source: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), v 5553 LNCS, n PART 3, p 915-922, 2009, Advances in Neural Networks - ISNN 2009 - 6th International Symposium on Neural Networks, ISNN 2009, Proceedings Language: English
4. “Structural damage detection using combined finite-element and model Lamb wave propagation parameters” Ratnam, C. (Dept. of Mech. Eng., Andhra Univ., Visakhapatnam, India); Ben, B.S.; Ben, B.A. Source: Proceedings of the Institution of Mechanical Engineers, Part C (Journal of Mechanical Engineering Science), v 223, n C3, p 769-77, March 2009
5. “Energy harvesting and wireless energy transmission for embedded sensor nodes” Farinholt, Kevin (Engineering Institute MS T001, Los Alamos National Laboratory, Los Alamos, NM 87544); Taylor, Stuart; Miller, Nathan; Sifuentes, Wilfredo; Moro, Erik; Park, Gyuhae; Farrar, Charles; Flynn, Eric; Mascarenas, David; Todd, Michael Source: Proceedings of SPIE - The International Society for Optical Engineering, v 7288, 2009, Active and Passive Smart Structures and Integrated Systems 2009 Language: English
6. “Expert group neural networks for structural health diagnosis of Mau-Lo creek cable-stayed bridge” Lin, C.-C.J. (Nat. Center for Res. on Earthquake Eng., Taipei, Taiwan); Yu-Chi Sung Source: ICIC Express Letters, v 3, n 1, p 47-52, March 2009
7. “An oil condition monitoring technique to determine the optimal oil type and maintenance schedule” Mollazade, K. (Dept. of Agric. Machinery, Univ. of Tehran, Karaj, Iran); Ahmadi, H. Source: Structural Health Monitoring, v 8, n 4, p 331-9, July 2009
8. “Robust feature extraction for rapid classification of damage in composites” Coelho, Clyde K. (Department of Mechanical and Aerospace Engineering, Arizona State University, Tempe, AZ 85287-6106, United States); Reynolds, Whitney; Chattopadhyay, Aditi Source: Proceedings of SPIE - The International Society for Optical Engineering, v 7286, 2009, Modeling, Signal Processing, and Control for Smart Structures 2009 Language: English
9. “Secure wireless collection and distribution of commercial airplane health data” Sampigethaya, Krishna (Department of Electrical Engineering, University of Washington, Seattle, WA, United States); Poovendran, Radha; Bushnell, Linda; Li, Mingyan; Robinson, Richard; Lintelman, Ott Source: IEEE Aerospace and Electronic Systems Magazine, v 24, n 7, p 14-20, July 2009 Language: English
10. “A decentralized Gauss-Seidel approach for in-network sparse signal recovery” Qing Ling (Dept. of ECE, Michigan Technol. Univ., Houghton, MI, USA); Zhi Tian Source: 2009 12th International Conference on Information Fusion (FUSION), p 380-7, 2009
11. “How can active hums safeguard towards the increasing complexity of avionics?” Melentis, J. (Vetronics Research Centre, University of Sussex, Brighton, BN1 9QT, United Kingdom); Ibarra, I.; Stipidis, E.; Charchalakis, P.; Ali, F.H. Source: IET Conference Publications, n 542 CP, 2008, 3rd IET International Conference on System Safety 2008 Language: English
12. “Active infrared thermographic inspection technique for elevated concrete structures using remote heating system” Kurita, Koichi (Department of Electrical Engineering, Kochi National College of Technology, 200-1 Monobe-Otsu, Nankoku, Kochi, 783-8508, Japan); Oyado, Michiaki; Tanaka, Hisashi; Tottori, Seiichi Source: Infrared Physics and Technology, v 52, n 5, p 208-213, September 2009 Language: English
13. “Energy harvesting utilizing single crystal PMN-PT material and application to a self-powered accelerometer” Song, H.J. (Dept. of Aerosp. Eng., Univ. of Maryland, College Park, MD, USA); Choi, Y.T.; Wang, G.; Wereley, N.M. Source: Journal of Mechanical Design, v 131, n 9, p 091008 (8 pp.), Sept. 2009
14. “Health forecast for aircraft based on adaptive MVGFM” Jianguo Cui (Automatization Coll., Shenyang Inst. of Aeronaut. Eng., Shenyang, China); Desheng Song; Ming Li; Changjun Xu; Peng Shi Source: 2009 International Conference on Measuring Technology and Mechatronics Automation (ICMTMA), p 821-4, 2009
15. “Design and study of fiber optic strain demodulation system based on LabVIEW” Lang Li-ying (Hebei Univ. of Eng., Handan, China); Shen Lan; Zhao Jian-jiao Source: 2009 International Conference on Measuring Technology and Mechatronics Automation (ICMTMA), p 288-91, 2009
16. “Acoustic emission techniques for early detection of bearing faults using LabVIEW” Elmaleeh, Mohammed A. A. (Electrical and Electronic Engineering Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 31750 Tronoh, Perak, Malaysia); Saad, N. Source: Proceeding of the 5th International Symposium on Mechatronics and its Applications, ISMA 2008, 2008, Proceeding of the 5th International Symposium on Mechatronics and its Applications, ISMA 2008 Language: English
17. “Long-term effects of orthophosphate treatment on copper concentration” Schock, Michael R. (Division of Water Resources, US Environmental Protection Agency, 26 W. Martin Luther, Cincinnati, OH 45220); Sandvig, Anne M. Source: Journal / American Water Works Association, v 101, n 7, p 71-82+12, July 2009 Language: English
18. “Fiber-optic Bragg gratings as magnetic field-insensitive strain sensors for the surveillance of cryogenic devices” Latka, I. (Inst. of Photonic Technol. (IPHT), Jena, Germany); Ecke, W.; Hofer, B.; Habisreuther, T.; Willsch, R. Source: Cryogenics, v 49, n 9, p 490-6, Sept. 2009
19. “Power harvesting for railroad track safety enhancement using vertical track displacement” Nelson, Carl A. (Dept. of Mechanical Engineering, Univ. of Nebraska-Lincoln, N104 WSEC, Lincoln, NE 68588); Platt, Stephen R.; Hansena, Sean E.; Fateh, Mahmood Source: Proceedings of SPIE - The International Society for Optical Engineering, v 7288, 2009, Active and Passive Smart Structures and Integrated Systems 2009 Language: English
20. “Damage detection in steel plates using artificial neural networks” Krishnan, R.P. (Sch. of Mechatron. Eng., Univ. Malaysia Perlis, Arau, Malaysia); Rahiman, M.H.F.; Yaacob, S.; Majid, M.S.A.; Paulraj, M.P. Source: 2009 International Conference on Control, Automation, Communication and Energy Conservation (INCACEC), p 4 pp., 2009
21. “Application of optical coherence tomography for imaging of scaffold structure and micro-flows characterization” Veksler, B. (Cranfield Health, Cranfield University, Cranfield, MK43 0AL, United Kingdom); Kobzev, E.; Bonesi, M.; Meglinski, I. Source: Proceedings of SPIE - The International Society for Optical Engineering, v 7139, 2008, 1st Canterbury Workshop on Optical Coherence Tomography and Adaptive Optics Language: English
22. “ Energy harvesting - Small scale energy production from ambient sources” Yeatman, Eric M. (Imperial College London, Exhibition Rd., London SW7 2AZ, United Kingdom) Source: Proceedings of SPIE - The International Society for Optical Engineering, v 7288, 2009, Active and Passive Smart Structures and Integrated Systems 2009 Language: English
2. “Validation of HDOP measure for impact detection in sensor network-based structural health monitoring” Akopian, D. (Dept. of Electr. & Comput. Eng., Univ. of Texas at San Antonio, San Antonio, TX, USA); Melkonyan, A.; Chen, C.L.P. Source: IEEE Sensors Journal, v 9, n 9, p 1098-102, Sept. 2009
3. “Design and implementation of the structure health monitoring system for bridge based on wireless sensor network” Yin, An (Department of Control Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China); Wang, Bingwen; Liu, Zhuo; Hu, Xiaoya Source: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), v 5553 LNCS, n PART 3, p 915-922, 2009, Advances in Neural Networks - ISNN 2009 - 6th International Symposium on Neural Networks, ISNN 2009, Proceedings Language: English
4. “Structural damage detection using combined finite-element and model Lamb wave propagation parameters” Ratnam, C. (Dept. of Mech. Eng., Andhra Univ., Visakhapatnam, India); Ben, B.S.; Ben, B.A. Source: Proceedings of the Institution of Mechanical Engineers, Part C (Journal of Mechanical Engineering Science), v 223, n C3, p 769-77, March 2009
5. “Energy harvesting and wireless energy transmission for embedded sensor nodes” Farinholt, Kevin (Engineering Institute MS T001, Los Alamos National Laboratory, Los Alamos, NM 87544); Taylor, Stuart; Miller, Nathan; Sifuentes, Wilfredo; Moro, Erik; Park, Gyuhae; Farrar, Charles; Flynn, Eric; Mascarenas, David; Todd, Michael Source: Proceedings of SPIE - The International Society for Optical Engineering, v 7288, 2009, Active and Passive Smart Structures and Integrated Systems 2009 Language: English
6. “Expert group neural networks for structural health diagnosis of Mau-Lo creek cable-stayed bridge” Lin, C.-C.J. (Nat. Center for Res. on Earthquake Eng., Taipei, Taiwan); Yu-Chi Sung Source: ICIC Express Letters, v 3, n 1, p 47-52, March 2009
7. “An oil condition monitoring technique to determine the optimal oil type and maintenance schedule” Mollazade, K. (Dept. of Agric. Machinery, Univ. of Tehran, Karaj, Iran); Ahmadi, H. Source: Structural Health Monitoring, v 8, n 4, p 331-9, July 2009
8. “Robust feature extraction for rapid classification of damage in composites” Coelho, Clyde K. (Department of Mechanical and Aerospace Engineering, Arizona State University, Tempe, AZ 85287-6106, United States); Reynolds, Whitney; Chattopadhyay, Aditi Source: Proceedings of SPIE - The International Society for Optical Engineering, v 7286, 2009, Modeling, Signal Processing, and Control for Smart Structures 2009 Language: English
9. “Secure wireless collection and distribution of commercial airplane health data” Sampigethaya, Krishna (Department of Electrical Engineering, University of Washington, Seattle, WA, United States); Poovendran, Radha; Bushnell, Linda; Li, Mingyan; Robinson, Richard; Lintelman, Ott Source: IEEE Aerospace and Electronic Systems Magazine, v 24, n 7, p 14-20, July 2009 Language: English
10. “A decentralized Gauss-Seidel approach for in-network sparse signal recovery” Qing Ling (Dept. of ECE, Michigan Technol. Univ., Houghton, MI, USA); Zhi Tian Source: 2009 12th International Conference on Information Fusion (FUSION), p 380-7, 2009
11. “How can active hums safeguard towards the increasing complexity of avionics?” Melentis, J. (Vetronics Research Centre, University of Sussex, Brighton, BN1 9QT, United Kingdom); Ibarra, I.; Stipidis, E.; Charchalakis, P.; Ali, F.H. Source: IET Conference Publications, n 542 CP, 2008, 3rd IET International Conference on System Safety 2008 Language: English
12. “Active infrared thermographic inspection technique for elevated concrete structures using remote heating system” Kurita, Koichi (Department of Electrical Engineering, Kochi National College of Technology, 200-1 Monobe-Otsu, Nankoku, Kochi, 783-8508, Japan); Oyado, Michiaki; Tanaka, Hisashi; Tottori, Seiichi Source: Infrared Physics and Technology, v 52, n 5, p 208-213, September 2009 Language: English
13. “Energy harvesting utilizing single crystal PMN-PT material and application to a self-powered accelerometer” Song, H.J. (Dept. of Aerosp. Eng., Univ. of Maryland, College Park, MD, USA); Choi, Y.T.; Wang, G.; Wereley, N.M. Source: Journal of Mechanical Design, v 131, n 9, p 091008 (8 pp.), Sept. 2009
14. “Health forecast for aircraft based on adaptive MVGFM” Jianguo Cui (Automatization Coll., Shenyang Inst. of Aeronaut. Eng., Shenyang, China); Desheng Song; Ming Li; Changjun Xu; Peng Shi Source: 2009 International Conference on Measuring Technology and Mechatronics Automation (ICMTMA), p 821-4, 2009
15. “Design and study of fiber optic strain demodulation system based on LabVIEW” Lang Li-ying (Hebei Univ. of Eng., Handan, China); Shen Lan; Zhao Jian-jiao Source: 2009 International Conference on Measuring Technology and Mechatronics Automation (ICMTMA), p 288-91, 2009
16. “Acoustic emission techniques for early detection of bearing faults using LabVIEW” Elmaleeh, Mohammed A. A. (Electrical and Electronic Engineering Department, Universiti Teknologi PETRONAS, Bandar Seri Iskandar, 31750 Tronoh, Perak, Malaysia); Saad, N. Source: Proceeding of the 5th International Symposium on Mechatronics and its Applications, ISMA 2008, 2008, Proceeding of the 5th International Symposium on Mechatronics and its Applications, ISMA 2008 Language: English
17. “Long-term effects of orthophosphate treatment on copper concentration” Schock, Michael R. (Division of Water Resources, US Environmental Protection Agency, 26 W. Martin Luther, Cincinnati, OH 45220); Sandvig, Anne M. Source: Journal / American Water Works Association, v 101, n 7, p 71-82+12, July 2009 Language: English
18. “Fiber-optic Bragg gratings as magnetic field-insensitive strain sensors for the surveillance of cryogenic devices” Latka, I. (Inst. of Photonic Technol. (IPHT), Jena, Germany); Ecke, W.; Hofer, B.; Habisreuther, T.; Willsch, R. Source: Cryogenics, v 49, n 9, p 490-6, Sept. 2009
19. “Power harvesting for railroad track safety enhancement using vertical track displacement” Nelson, Carl A. (Dept. of Mechanical Engineering, Univ. of Nebraska-Lincoln, N104 WSEC, Lincoln, NE 68588); Platt, Stephen R.; Hansena, Sean E.; Fateh, Mahmood Source: Proceedings of SPIE - The International Society for Optical Engineering, v 7288, 2009, Active and Passive Smart Structures and Integrated Systems 2009 Language: English
20. “Damage detection in steel plates using artificial neural networks” Krishnan, R.P. (Sch. of Mechatron. Eng., Univ. Malaysia Perlis, Arau, Malaysia); Rahiman, M.H.F.; Yaacob, S.; Majid, M.S.A.; Paulraj, M.P. Source: 2009 International Conference on Control, Automation, Communication and Energy Conservation (INCACEC), p 4 pp., 2009
21. “Application of optical coherence tomography for imaging of scaffold structure and micro-flows characterization” Veksler, B. (Cranfield Health, Cranfield University, Cranfield, MK43 0AL, United Kingdom); Kobzev, E.; Bonesi, M.; Meglinski, I. Source: Proceedings of SPIE - The International Society for Optical Engineering, v 7139, 2008, 1st Canterbury Workshop on Optical Coherence Tomography and Adaptive Optics Language: English
22. “ Energy harvesting - Small scale energy production from ambient sources” Yeatman, Eric M. (Imperial College London, Exhibition Rd., London SW7 2AZ, United Kingdom) Source: Proceedings of SPIE - The International Society for Optical Engineering, v 7288, 2009, Active and Passive Smart Structures and Integrated Systems 2009 Language: English
Sunday, September 13, 2009
1. “Structural integrity monitoring index (SIMdex): A methodology for assessing structural health monitoring technologies” De Leeuw, B. (Plant Asset Management, Enterprise House, Ocean Village, Southampton, United Kingdom); Brennan, F.P. Source: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, v 223, n 5, p 515-523, August 1, 2009
2. ”Automated impedance-based structural health monitoring incorporating effective frequency shift for compensating temperature effects” Ki-Young Koo (Dept. of Civil & Environ. Eng., Korea Adv. Inst. of Sci. & Technol., Daejeon, South Korea); Seunghee Park; Jong-Jae Lee; Chung-Bang Yun Source: Journal of Intelligent Material Systems and Structures, v 20, n 4, p 367-77, March 2009
3. “Structural health monitoring of rods based on natural frequency and antiresonant frequency measurements” Dilena, M. (Dipt. di Georisorse e Territorio, Universitd degli Studi di Udine, Udine, Italy); Morassi, A. Source: Structural Health Monitoring, v 8, n 2, p 149-73, March 2009
4. “Bridge system performance assessment from structural health monitoring: A case study” Liu, Ming (Lehigh Univ., Dept. of Civil and Environmental Engineering, ATLSS Center, 117 ATLSS Dr., Bethlehem, PA 18015-4729, United States); Frangopol, Dan M.; Kim, Sunyong Source: Journal of Structural Engineering, v 135, n 6, p 733-742, 2009
5. “Dual scale structural health monitoring system combining FBG sensors and laser scanning” Lima, H.F. (Phys. Dept., Univ. of Aveiro, Aveiro, Portugal); Domingues, M.F.; Nogueira, R.N.; Andre, P.; Pinto, J.L. Source: Proceedings of the SPIE - The International Society for Optical Engineering, v 7391, p 73910O (8 pp.), 2009
6. “Use of sensor systems for remote monitoring of corrosion and structural health: Case studies” Hill, D. (Det Norske Veritas Research and Innovation, 5777 Frantz Rd., Dublin, OH 43017); Marion, S.; Ayello, F.; Cunci, L.; Sridhar, N. Source: NACE - International Corrosion Conference Series, 2009, Corrosion 2009
7. “Lessons learned from health monitoring of rocket motors” Buswell, Jim (Newton Consultancy (Apple Fall) Ltd); Fall, Apple Source: 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2005, 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit
8. “Performance evaluation and reliable implementation of data transmission for wireless sensors on rotating mechanical structures” Lei Tang (Dept. of Mech. Eng., Clemson Univ., Clemson, SC, USA); Kuang-Ching Wang; Yong Huang Source: Structural Health Monitoring, v 8, n 2, p 113-24, March 2009
9. “Optimal placement of sensors for sub-surface fatigue crack monitoring” Teo, Y.H. (Department of Mechanical and Aerospace Engineering, Monash University, Clayton, Vic. 3168, Australia); Chiu, W.K.; Chang, F.K.; Rajic, N. Source: Theoretical and Applied Fracture Mechanics, v 52, n 1, p 40-49, August 2009
10. “A monolithic interdigitated PVDF transducer for lamb wave inspection” Hua Gu (Caterpillar Production Syst. Div., Caterpillar Inc., Mossville, IL, USA); Wang, M.L. Source: Structural Health Monitoring, v 8, n 2, p 137-48, March 2009
11. “Structural damage detection using auxiliary particle filtering method” Songtao Xue (Sch. of Sci. & Eng., Dept. of Archit., Kinki Univ., Higashi-Osaka, Japan); Hesheng Tang; Qiang Xie Source: Structural Health Monitoring, v 8, n 2, p 101-12, March 2009
12. “Acoustic emission for monitoring aircraft structures” Holford, K.M. (Cardiff School of Engineering, Cardiff University, Queen's Building, Parade, Cardiff, CF24 3AA, United Kingdom); Pullin, R.; Evans, S.L.; Eaton, M.J.; Hensman, J.; Worden, K. Source: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, v 223, n 5, p 525-532, August 1, 2009
13. “Minimal-sensing, passive force identification techniques for a composite structural missile component” Stites, N. (Ray W. Herrick Labs., Purdue Univ., West Lafayette, IN, USA); White, J.; Adams, D.E.; Triplett, M. Source: Shock and Vibration, v 16, n 2, p 117-42, 2009
14. “Continuous monitoring of the Øresund Bridge: system and data analysis” Peeters, B. (LMS Int., Leuven, Belgium); Couvreur, G.; Razinkov, O.; Kundig, C.; Van der Auweraer, H.; De Roeck, G. Source: Structure and Infrastructure Engineering, v 5, n 5, p 395-405, Oct. 2009
15. “Intelligent structural state retrieval model inspired from human memory” Wei Zheng (Key Laboratory for Optoelectronic Technology and System, College of Optoelectronic Engineering, Chongqing University, Chongqing 400044, China); Weimin Chen Source: Journal of Intelligent Material Systems and Structures, v 20, n 13, p 1521-1528, September 2009
16. “Improved performance data loggers for health monitoring” Borsum, William K. (DASCOR, Escondido, CA, United States); Lizon, Richard; Perry, John; Santrizos, Tom Source: 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2005, 41st AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit
17. “Power modulation based fiber-optic loop-sensor having a dual measurement range” Nguyen, N.Q. (Dept. of Mech. & Aerosp. Eng., New York Univ., Brooklyn, NY, USA); Gupta, N. Source: Journal of Applied Physics, v 106, n 3, p 033502 (5 pp.), 1 Aug. 2009
18. “Monitoring corrosion behavior using acoustic emission techniques” Wheat, H.G. (Mechanical Engineering Department, Texas Materials Institute, University of Texas at Austin, Austin, TX 78712) Source: NACE - International Corrosion Conference Series, p 072911-0729115, 2007, Corrosion 2007
19. “A low-power wireless sensing device for remote inspection of bolted joints” Mascarenas, D.L. (Department of Structural Engineering, University of California, San Diego, CA, United States); Park, G.; Farinholt, K.M.; Todd, M.D.; Farrar, C.R. Source: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, v 223, n 5, p 565-575, August 1, 2009
20. “Physical-parameter identification of base-isolated buildings using backbone curves” Huang, Ming-Chih (Air Force Institute of Technology, Dept. of Aircraft Engineering, Gangshan 820, Taiwan); Wang, Yen-Po; Chang, Jer-Rong; Chen, Yi-Hsuan Source: Journal of Structural Engineering, v 135, n 9, p 1107-1114, 2009
21. “Health diagnosis for aircraft based on EMD and neural network” Jianguo Cui (Autom. Coll., Shenyang Inst. of Aeronaut. Eng., Shenyang, China); Xinqi Zheng; Ming Li; Zhonghai Li; Dong Liu Source: 2009 International Conference on Measuring Technology and Mechatronics Automation (ICMTMA), p 677-80, 2009
22. “Sensor requirements to monitor the real time performance of a gas turbine engine undergoing compressor blade erosion” Scala, Sinclaire M. (Concurrent Technologies Corporation, Largo, FL); Konrad, Martin; Mason, -Robert B.; Semick, Joshua; Skelton, Don Source: 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, 2004, 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit
23. “A hierarchical classification scheme for computationally efficient damage classification” Coelho, C.K. (Department OfMechanical and Aerospace, Engineering, Arizona State University, P.O. Box 876106, Tempe, AZ 85287-6106, United States); Das, S.; Chattopadhyay, A. Source: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, v 223, n 5, p 497-505, August 1, 2009
24. “AE monitoring for damage assessment of RC exterior beam-column subassemblages subjected to cyclic loading” Benavent-Climent, A. (Dept. of Mech. of Struct., Univ. of Granada, Granada, Spain); Castro, E.; Gallego, A. Source: Structural Health Monitoring, v 8, n 2, p 175-89, March 2009
25. “Structural damage detection using time domain periodogram analysis” Zimin, V.D. (Dept. of Mech. Eng., Univ. of Houston, Houston, TX, USA); Zimmerman, D.C. Source: Structural Health Monitoring, v 8, n 2, p 125-35, March 2009
VerPro's Structural Health Monitoring Group located in Bishnupur, WB has openings for Software Engineers responsible for legacy and new product software development and developing the hardware platforms used by the software. Design responsibilities include: perform requirement analysis, software architecture design and optimization, data structure design, software partitioning for software criticality management, interface circuit requirement definition, high and low level software requirement development, control algorithm development, serial communication protocol development, programming in C#, hardware/software integration, memory usage analysis, stack usage analysis, timing analysis, throughput analysis, and other.
VerPro's Structural Health Monitoring Group is hiring Software Engineers to join the Structural Health Monitoring Team. This is an excellent opportunity to join a team to work on exciting Structural Engineering development programs. There are numerous opportunities for learning, developing, and career advancement. These positions are being created in Bishnupur, WB. Bishnupur offers many benefits. As a growing community and the 16th-centuries historical city in the India, Bishnupur has a bustling downtown area, low cost of living, award-winning schools, and diverse cultural options.
VerPro's Structural Health Monitoring Group is hiring Software Engineers to join the Structural Health Monitoring Team. This is an excellent opportunity to join a team to work on exciting Structural Engineering development programs. There are numerous opportunities for learning, developing, and career advancement. These positions are being created in Bishnupur, WB. Bishnupur offers many benefits. As a growing community and the 16th-centuries historical city in the India, Bishnupur has a bustling downtown area, low cost of living, award-winning schools, and diverse cultural options.
Subscribe to:
Posts (Atom)
